EasyRAID E6 Podręcznik Użytkownika Pobierz pdf (Strona 41)

5. Set RAID Level

Move cursor ( ) to the desired RAID Level ( 5, 3, 1, 0, 0+1,

None ), press " Enter " to confirm.

All data on the disk drives will be lost by changing the RAID Level.

* RAID Level " None " = No Configuration

6. Set Hot Spare Disk

Select " Yes " to set one Disk Drive as a Hot-spare Disk.

(Valid for RAID Level 5 and 3 , the total number of Disk Drives

installed must be more than 3 Disk Drives )

7. Set SCSI ID

Each device on a specific SCSI bus must be configured with a

target address ( which is a "SCSI ID" ) which is different from any

other devices on the SCSI Bus.

The default SCSI ID for this system is ID 0.

If you need to assign a different ID # for your Disk Array. The

available SCSI ID# for this system is ID# 0 ~ 14 .

You must assign a different SCSI ID to each SCSI device on the

SCSI Bus. The SCSI ID# must be Unique for each device.

Warning

3-5

Configuration

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 84 85

Brak uwag

EasyRAID E6 Podręcznik Użytkownika Strona 41